Nanocustoms 1.70h for Nanocube 24DX (70w HQI + 36w PC) [62]

Click to enlarge

Expert Series DIY KIT

Featuring an integrated hybrid lighting system. Offering the best of HQI lighting, and the sunrise/sunset capability of the 2x18w Actinic PC lighting supplement.

We took all the features of the "big" lighting systems, and put them in your stock hood. If you are looking for a tricked out 24g DX, this is the retrokit for you.

After nearly 2 full years of testing, nanocustoms has developed a foolproof way to mod a 70w into your factory canopy, all while retaining the factory splashguard. While to some this may seem trivial, it means safe temperatures, and enduring operation.

Featuring the highest quality components, methods, and nanocustoms experience, the 1.70 series for the 24g DX is the choice for those who want to add HQI light, all while retaining the factory fit, finish, and appearance. This setup will add actinic supplementation and allow sunrise/sunset simulation. This system runs so cool that in many cases it can be run without a chiller. Feel free to ask if this system will work in your case without additional cooling.

An updated, cooler running, and quieter 70w HQI lighting engine, available dual 18w actinic lighting, and other options, this is the system for the person who wants it all.

Please note: Soldering is NECESSARY. Our results are based on soldered/heatshrunk connections.

1 x 70w Ushio 10,000K, 14,000K or 20,000 HQI bulb
1 x 70w Sunpark Electronic Ballast (2 year warranty!!!)
1 x Workhorse 22 Ballast
2 x 18w PC Actinic Blue
1 x Anodized Aluminum Ballast Enclosure
1 x Remote Ballast Cable
1 x 1mm Hammertone Reflector
1 x 6mm Tempered Safety Glass - Heatsink cooled
1 x 140F High Temperature Cutoff (safety feature)

Options
1 x R2 5 LED Moonlights

**All HQI lighting kits and complete systems are safe for your all-in-one aquarium.  Each HQI lighting kit and system comes equipped with a heat-activated thermal cut-off switch and a fan relay switch to prevent any possible damage to your tank.**

Run fans 24/7 or at least 2 hour after halide turns off to ensure proper cooling.  Nanocustoms also highly recommends replacing fans every 6-8 months for optimum heat removal and proper cooling throughout the canopy.